Please verify your age.
Hover over main image to zoom
The Black Nzonic Clone by EHPRO is a fully mechanical mod that is coated with PVD in black. It has silver plated pins, magnetic button, and is telescopic. There are vent holes on the bottom side of the Nzonic to prevent overheating. This mod is 510 threaded and is compatible with 18350, 18500, and 18650 batteries.
1x EHPRO Black Nzonic Clone
Posted by deep toot on 9th Feb 2014
Very cool mod, looks great, feels great, and is very functional. Having to change the center for a 650 is a little annoying but you get used to it. The biggest issue though is the button loves to unscrew when you lock the safety. Haven't experienced it actually popping off but I find myself screwing back in place a lot. Overall I am very happy with my first mod, and u can't find it for a better price anywhere than eccigity :D
Posted by Roy Jones on 30th Jan 2014
The good - little voltage drop, hits pretty well, flush mounting ith most RBA's
The bad - button on the bottom unwinds very easily, gotten retighten every couple of hits or it is falling off
The ugly - the PVD coating, so highly touted by the manufacturer, scratches VERY easily. I don't even take it out to show off anymore, tons of micro scratches from just riding in my soft carrier (a converted camera bag).
Not Eciggity's fault though, shipping time was excellent, the product itself just wasn't worth the price, even for a clone
Posted by Unknown on 22nd Jan 2014
I've owned a few mods, magneto, maraxus, and the nzonic. I was very excited for this device and was quickly disappointed. It feels cheap in the hand, the button throw feels overly long and the locking switch has stuck on me several times. Threads by default are dirty but after a proper cleaning are squeaky clean. Hits pretty decently however. My biggest gripe about this device is the fire button. After taking apart the magnetic switch and some magnification - I noticed the button inside has tiny tiny metal grooves that makes a zipper noise every time you press the button. Overall, looks great, feels cheap
Posted by Hector Hernandez on 10th Jan 2014
I love the finish and the hefty weight. Almost feels like a weapon, smooth fire button and sharp threads. The button and the bottom contact pin did have an awful lot of play so I wrapped the thread with plumbers tape (the thin white film) a few times and got that on there thight, Now it is perfect, no play and everytime I remove the safety it fires perfect with out the button getting longer cause it screwed off.
Posted by Kristofer Youker on 6th Jan 2014
This mod hits hard, is easy to use, and is very lightweight. The only draw backs are that the button comes loose after every couple locking/unlocking motions, and it is a lot taller than i expected it to be. Other than that, it is fiar!
Excellent customer service. Vape safe.
Posted by Roy Jones Jr on 6th Jan 2014
First, this mod hits VERY well, no question. Solid feel, I don't know why I expected the feel to be more textured/rubbery, but is a solid metal feel.
My one caveat - the actual button, it unwibs/loosens VERY easily, I find myself twisting it back tight into the housing every few hits. Locktite fix? Resting the mod on the button while not locked, it goes in about 50-60% - not enough to make it fire though. Loose, metallic scraping feel for that first 60%, then a smoother solid engaging the last 40%. Guess that's 2 caveats.
Time will tell how long the PVD coat process will last, but I like it. Now if I could find a nice black RBA to top it off...
Posted by Christopher Larson on 2nd Jan 2014
This is a GREAT Mech! They dont tell you in the description but it comes with TWO tubes 1 for 18350's the other for 18500/18650's . and a nice storage pouch! I love it so far no issues at all great floating pin The magnets hit HARD! Really nice threading..I say this is a NO brainer! The shipping was fast as well!