**You can change the setting of your VT200 Box Mod to 14.43Wh instead of the default 9Wh set by EVOLV for slightly longer battery life**
The HCigar VT200 is powered by an 11.1V 3S Li-Po 1300mAh battery (equivalent to 3900mAh of 18650 batteries) and features the new and highly anticipated Evolv DNA200 board. Evolv's DNA200 board can output anywhere from 1 watt to TRUE 200 watts of DC power output and also includes voltage step up/down topology. The 3S Li-Po 1300mAh battery is included with the HCigar VT200 and can be replaced with a backup battery, which will be available for purchase in the near future. This powerful box mod is made of high quality aluminum.
Genuine Evolv DNA200 Chip
0.911" OLED Screen
Temperature Protection (Celsius and Fahrenheit)
Automatic Resistance Detection
Lower Lock Mode
Power Preset Mode
Step Up/Step Down Topology
Micro USB Charging Port (Passthrough)
Made Of High Quality Aluminum
Brass Spring Loaded 510 Connector
Battery: Replaceable 11.1V 3S Li-Po 1300mAh Battery (Equivalent to 3900mAh of 18650 batteries)
Output Power: 1W - 200W Output voltage: 1V - 9V
Temperature Range: 200ºF - 600ºF (~100°C - 300°C)
Temperature Control Resistance Range (Cold Reading): 0.08Ω - 1.0Ω
Standard Resistance Range: 0.1Ω - 2.0Ω
1x Hcigar VT200 Box Mod
1x 11.1V 3S Li-Po 1300mAh Battery
1x Micro USB Charging Cable
1x User Manual
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
Battery does suck. Dead by 5pm. And that's at 70w and messing around with the settings. Nice finish and nothing hits like a DNA device. I dont care what people say. No problems with it so far. Eric Stump
2nd Dec 2016
first DNA200 mod
So far I am loving this not much bigger than my 1X 18650 mods but battery life seems better and I have the option of much higher wattage. Have only dabbled in the escribe software, but what I've seen it looks perfect for tailoring a personal vape.Jason
3rd May 2016
Have had my VT200 for about 2 weeks now, and let me say, if I lost this mod...I would definitely order 1 again immediately. It has stood up to every build I've thrown at it. Although, I do stay in the recommended 0.08 range. I have an SXmini mclass, and mlclass, and the VT200 is my solid go to mod. Tuned and customized it the way I like it with the evolve software, and works without a flaw. For me, a heavy vaper..I get a good 12 hours of battery life. That's more than I expected.
Eciggity was a pleasure to do business with, and the shipping was exceptional...was quick on the delivery, and a great product.
I highly recommend the VT200, and thanks Eciggity for great service.David
20th Feb 2016
I loved this mod it was my favorite mod out of my sig 150 TC, Snow Wolf, IPV3 Li, IPV4s until a week into own the mod it just quit working in the middle of vaping. I don't know what happened it just crapped out, wouldn't power on, charge, recognize by escribe nothing dead as a doornail. Like I said I loved this mod until that happened so it's making getting another Hcigar (once eciggity receives the broken one and credits my account) again a little iffy so I think I'm going to go with the Efusion by Lost Vape for my second go around with the DNA200s Casey from Iowa
10th Dec 2015
I went for the blue one and looks astonishing, all my devices had been mostly black but I wanted a change and I'm glad I did get a blue one. The finish is great to the hands and performs well so far. Just wish Hcigar would release a battery data to set it right instead of self testing it to set up in EScribre, other 2 or 3 DNA200 mod manufacturers had done so.AznGuy76
21st Nov 2015
The build quality of this product is excellent, was kinda concerned about the 510 but it's made out of a harder brass. Eciggity was fast on shipping. I no no complaints at all.Unknown
29th Oct 2015
Great mod with fantastic chip. Too bad the battery is not as advertised.
I love the mod body design and I love the DNA 200 chip. It provides a great, fully customizable vaping experience. It's just a shame the battery only measures out to just over 900 mah instead of the full 1300 mah HCigar advertises it to be. But that said, most other mods in the same price range or higher are using 900 mah batteries, so this doesn't kill it for me. Just something to note and hopefully HCigar will look into and address in the near future.David
25th Oct 2015
I am very happy with the product. Works very well and the battery lasts me all day at work. I have had no issues at all everything works great. I bought two Hana modz 200's that were complete garbage compared to the VT200. Dan
21st Oct 2015
VERY NICE MOD FOR THE MONEY
I bought this mod a couple weeks ago and it has been performing great, It had a couple cosmetic blemishes and I accidently dropped my tank on it so it has a small scratch from that but other than the cosmetic blemishes, I am absolutely in love with it...If you are thinking of buying it, Definitely do, but wait a couple of weeks, they are coming out with a version 2 with a stainless steel 510 instead of brass Unknown
19th Oct 2015
Very well made mod for TC (3S LiPo 11.2 volts, 1300mha)
The statement in the description of the Hcigar VT200, (“The HCigar VT200 is powered by an 11.1V 3S Li-Po 1300mAh battery (equivalent to 3900mAh of 18650 batteries)), is not correct and is misleading to many shoppers. The 3S lipo in this mod has three cells in series each cell is 3.7 volts at 1300mah to give you 11.2 volts at 1300mha. The DNA200 requires 11.2 to 12.2 volts to operate at it’s full capacity. The number of cells when in series is irrelevant to the mha capacity. If you put three of the cells in parallel then you would have 3900mah but voltage would only be 3.7 volts, but in series capacity stays the same, voltage increases. I hope this clears up some of the questions regarding the 3S lipo capacity in the VT200. All in all the DNA200 board is awesome and in this mod it is very nice even with 1300mha battery. Most other DNA200 mods are even less, (900mha to 1100mha). The last thing I will say is if you’re not interested in temp control the this is probably not for you.Phil
8th Oct 2015